RM43 Mix Ratio (The 360 Guideline)

So, you have some weed problems and need to make sure that they aren’t growing anywhere near your home anytime soon. Well, RM43 can be an effective solution to your problem. But that’s only true if you know how to mix them.

But what is the actual RM43 mix ratio?

RM43 total vegetation control mix ratio is roughly 1:18. That means with a gallon of water, you need to mix 7.4 ounces of RM43. Contrarily, for spot control, the mixing ratio is roughly 1:21, meaning you need to mix 6 ounces of RM43 per gallon of water. 

Now, this seems pretty straightforward, isn’t it? But there is more to this than simple mixing. In the next parts of this article, we will be discussing everything you need to know about the mix ratios. 

The Proper RM43 Mix Ratio: All You Need To Know 

The exact ratio of mixing RM43 is not constant. The percentage depends on the area you will be applying the chemical and for what purpose you will use it. To make things easier, we have divided them into tables. 

For total vegetation control, these are the RM43 mixing instructions:

Area RM43 Quantity/Gallon of Water
1000 sq ft 7.4-ounce
4,324 sq ft 32-ounce
8,648 sq ft 64-ounce
17,297 sq ft 1-gallon
43,243 sq ft 2.5-gallon

Now, for spot control, things are a little different. The mixture can be applied to any large area you want, as long as it is not too diluted. That’s why you need to follow the below table for directions:

RM43 Quantity  Add up to
6-ounce 1 gallon
32-ounce 5 gallons
64-ounce 10 gallons
1-gallons 21 gallons
2.5-gallon 53 gallons

So, it should be clear to you that the RM43 mix ratio per gallon of water varies based on your purpose. Now, if you follow these instructions, you should get good results no matter what purpose you are using the RM43 for.

Can You Mix RM43 With Diesel? 

Yes, you can mix RM43 with diesel. However, it is recommended to use water to dilute the mixture. But using diesel also works very well. Still, you need to be very cautious while mixing these two chemicals together as they can pose a health risk. 

Also, you need to check with the local authorities before using diesel as a herbicide. That’s because in many US states using diesel as a herbicide is illegal. 

How Important It Is To Get The Mixing Ratio Right?

Getting the mixing ratio right is very important as a slight change of the mixture can render the whole solution ineffective.

On the other hand, if the mixture is not diluted enough, it will be a waste of valuable products. So, either way, you’re wasting product or time.

In the end, if you do not end up using RM43 and choose to use a different product, then remember the ratios vary from product to product. The mixing ratio for Remedy Ultra is very different from RM43.

Tips For Getting The Best Results With RM43 

If you are using the RM43 for the first, there are a couple of things you must keep in mind. These tips will help you get the best results. Let’s see what they are:

  • You need to check the weather conditions before application. Make sure the temperature is above 60 degrees Fahrenheit with light winds.
  • Clean up the area where you intend to use the product. For example, remove debris from the treatment area before applying RM43.
  • Prior to treatment, you should also mow or cut weeds taller than six inches and allow two weeks of new growth.
  • For the best possible result, make sure to apply RM43 uniformly throughout the area.
  • If you live in an area where it rains heavily and frequently, you may need to re-apply every six to eight months.
  • Do not apply RM43 over the root systems of existing plants or trees. Also, avoid using it in areas intended for planting in the next year.
  • Keep people and pets out of the treated area for at least two hours.

FAQs

Is RM43 similar to Roundup?

No, RM43 is not similar to Roundup. RM43 contains both glyphosate and imazapyr as active ingredients, whereas Roundup only contains glyphosate. Imazapyr in RM43 provides an additional mode of action, making it more effective against a broader range of weeds.

How fast does RM43 work?

RM43 typically takes a few weeks to effectively control and kill weeds. The exact timeframe can vary depending on factors. For example, the type of weeds, their size and maturity, weather conditions, and the application method used.

Does rain affect RM43?

Yes, rainfall can have an impact on the effectiveness of RM43. This is especially true if it is applied shortly before or during a rain event. Heavy or excessive rain can potentially overdilute the product and cause it to wash off. Also, because of rain, it may affect areas where you don’t want it to reach.

Conclusion

So, now you know how important the RM43 mix ratio is. If you overdilute it, the product will not be effective. On the contrary, under-diluting will just waste valuable products.

But what you must ensure before using is personal safety. Use personal protective equipment when mixing and applying as the product is highly toxic.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top